Millwork Commons

Downtown, Midtown, and all parts east of 72nd.

Moderators: nebugeater, Omaha Cowboy, Brad, BRoss

Dusty
Human Relations
Posts: 781
Joined: Wed May 25, 2011 10:53 pm
Location: Central Florida

Re: Millwork Commons

Post by Dusty »

This is great! I was mainly hoping for the extension to Cuming St. Much more inviting to pull people across the street!

Image
Omaha's Transit Future starts now. Let's make the change!
Omaha Transit Network
User avatar
Brad
Photographer
Posts: 1036469
Joined: Sat Feb 28, 2004 6:03 pm
Location: Omaha, NE

Re: Millwork Commons

Post by Brad »

BRoss wrote: Wed Jan 31, 2024 12:08 pm
Dusty wrote: Wed Jan 31, 2024 11:48 am Idea for Millwork Commons. Could we rebuild Izard Street to connect up to 10th and Cuming?
I was just thinking it would be easier for a bus to cut through the area if this road was connected better.

Image
10th and Cuming is set to be connected 11th and Izard this year. See page 39 of the CIP.
Are they keeping the Union Pacific Display Track?
User avatar
BRoss
IT Director
Posts: 10003341
Joined: Fri Aug 04, 2006 7:39 pm
Location: West Central Omaha

Re: Millwork Commons

Post by BRoss »

Brad wrote: Wed Jan 31, 2024 12:28 pm Are they keeping the Union Pacific Display Track?
Not sure what it will look like.
User avatar
BRoss
IT Director
Posts: 10003341
Joined: Fri Aug 04, 2006 7:39 pm
Location: West Central Omaha

Re: Millwork Commons

Post by BRoss »

One other thing too - there are other road extensions planned for around this area in the next couple years as well including a truck bypass. The Companion Projects section lists them all:
  • 2019T-130 - Millwork Avenue - 11th to 13th Street;
  • 2019T-132 - 12th Street - Millwork Avenue to Seward Street;
  • 2022T-137 - 14th Street - Nicholas Street to Millwork Avenue;
  • 2022T-138 – Millwork Avenue - 13th Street to 14th Street
Details on each are found on other pages of the CIP (don't feel like looking for them right now on my phone).
ita
County Board
Posts: 4736
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

These are road projects I can get behind. Establishing the grid and building more ped/bike connections. I do wonder what else is planned for the New Makerhood part of that area. I know Future Forward pretty much owns all the properties on both sides of 11th from Millwork Ave and Seward. They seem to be in a holding pattern for the most part while Millwork Commons has been booming.
User avatar
nativeomahan
County Board
Posts: 5982
Joined: Fri Nov 12, 2004 2:46 pm
Location: Omaha and Puerto Vallarta

Re: Millwork Commons

Post by nativeomahan »

Dusty wrote: Wed Jan 31, 2024 12:22 pm This is great! I was mainly hoping for the extension to Cuming St. Much more inviting to pull people across the street!

Image
This street extension would only add to the momentum for including a bus line north from the Old Market, up 10th Street and into the North Downtown/Millwork district.
Dusty
Human Relations
Posts: 781
Joined: Wed May 25, 2011 10:53 pm
Location: Central Florida

Re: Millwork Commons

Post by Dusty »

nativeomahan wrote: Fri Feb 02, 2024 11:29 am
Dusty wrote: Wed Jan 31, 2024 12:22 pm This is great! I was mainly hoping for the extension to Cuming St. Much more inviting to pull people across the street!

Image
This street extension would only add to the momentum for including a bus line north from the Old Market, up 10th Street and into the North Downtown/Millwork district.
I was originally thinking the same thing until they announced the soccer stadium. Not a big deal. I made a few small tweaks to my transit vison for 10th Street. Basically would run from the Zoo to Cuming and then run up Abbott to connect the soccer stadium and airport. In a way, you can say it's a tourist line from the airport to hit all the major attractions along 10th Street.
Even so, it's only a few blocks to walk to Millwork Commons.

Getting this connection to 10th and Cuming is huge. Brad called it right...what about the rail tracks blocking the path? As a pedestrian, the current way looks like a dead end. Having this connect will naturally pull people across the street right into Millwork Commons.
Omaha's Transit Future starts now. Let's make the change!
Omaha Transit Network
User avatar
thenewguy
County Board
Posts: 4296
Joined: Fri Oct 19, 2007 9:50 pm
Location: Council Bluffs

Re: Millwork Commons

Post by thenewguy »

Dusty wrote: Wed Jan 31, 2024 12:22 pm This is great! I was mainly hoping for the extension to Cuming St. Much more inviting to pull people across the street!

Image
a million dollars? I can't believe it costs that much for that small stretch of road
Go Cubs Go
Louie
County Board
Posts: 4896
Joined: Fri Dec 23, 2011 4:23 pm
Location: Dundee

Re: Millwork Commons

Post by Louie »

thenewguy wrote: Fri Feb 02, 2024 1:54 pm
Dusty wrote: Wed Jan 31, 2024 12:22 pm This is great! I was mainly hoping for the extension to Cuming St. Much more inviting to pull people across the street!

Image
a million dollars? I can't believe it costs that much for that small stretch of road
They have to remove the existing rail as well as connect and incorporate it into a fairly large intersection.
User avatar
Brad
Photographer
Posts: 1036469
Joined: Sat Feb 28, 2004 6:03 pm
Location: Omaha, NE

Re: Millwork Commons

Post by Brad »

thenewguy wrote: Fri Feb 02, 2024 1:54 pm a million dollars? I can't believe it costs that much for that small stretch of road
Remove Existing Pavement @ $15sqyd = 2000x15 = $30,000
Subgrade Preparation @ $5sqyd 4000x5 = $20,000
9" PCC Concrete Pavement @ $80sqyd 4000x80 = $320,000

So that's already $370,000 with just 3 items.

You still have Sidewalks, Curb Ramps, Crosswalks, Pavement Markings, Erosion Control, Seeding and Matting, Street Signs, and on and on and on.

Construction isn't cheap.
User avatar
thenewguy
County Board
Posts: 4296
Joined: Fri Oct 19, 2007 9:50 pm
Location: Council Bluffs

Re: Millwork Commons

Post by thenewguy »

Brad wrote: Sat Feb 03, 2024 12:13 am
thenewguy wrote: Fri Feb 02, 2024 1:54 pm a million dollars? I can't believe it costs that much for that small stretch of road
Remove Existing Pavement @ $15sqyd = 2000x15 = $30,000
Subgrade Preparation @ $5sqyd 4000x5 = $20,000
9" PCC Concrete Pavement @ $80sqyd 4000x80 = $320,000

So that's already $370,000 with just 3 items.

You still have Sidewalks, Curb Ramps, Crosswalks, Pavement Markings, Erosion Control, Seeding and Matting, Street Signs, and on and on and on.

Construction isn't cheap.
you aint lyin'

i mean, it makes sense: i was going to have a 22'x10' pad poured and it was almost double the quote i had 5 or 6 years ago
Go Cubs Go
GenX
Parks & Recreation
Posts: 1216
Joined: Thu Feb 04, 2016 8:16 pm
Location: Omaha

Re: Millwork Commons

Post by GenX »

Brad wrote: Sat Feb 03, 2024 12:13 am
thenewguy wrote: Fri Feb 02, 2024 1:54 pm a million dollars? I can't believe it costs that much for that small stretch of road
Remove Existing Pavement @ $15sqyd = 2000x15 = $30,000
Subgrade Preparation @ $5sqyd 4000x5 = $20,000
9" PCC Concrete Pavement @ $80sqyd 4000x80 = $320,000

So that's already $370,000 with just 3 items.

You still have Sidewalks, Curb Ramps, Crosswalks, Pavement Markings, Erosion Control, Seeding and Matting, Street Signs, and on and on and on.

Construction isn't cheap.
Plus utilities, infrastructure and likely all new traffic lights
ita
County Board
Posts: 4736
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

Drove by Millwork today and the Dizzy Mule project is looking good. Wish I got a picture, but it really enhances the neighborhood with added density and facelifting the abandoned property.
User avatar
skinzfan23
City Council
Posts: 11583
Joined: Mon Feb 09, 2004 11:26 am
Location: Omaha/Bellevue

Re: Millwork Commons

Post by skinzfan23 »

ita wrote: Wed Mar 27, 2024 5:00 pm Drove by Millwork today and the Dizzy Mule project is looking good. Wish I got a picture, but it really enhances the neighborhood with added density and facelifting the abandoned property.
Yeah I have been meaning to take a picture the last few times I was there as well.
User avatar
iamjacobm
City Council
Posts: 10801
Joined: Sat Apr 10, 2010 6:52 am
Location: Chicago

Re: Millwork Commons

Post by iamjacobm »

Nice get for the neighborhood.

https://nebraskaexaminer.com/briefs/goo ... t-network/
Google Fiber, a new-to-market high-speed fiber optic internet provider, has leased about 7,000 square feet in the rehabbed Ashton building of the Millwork Commons district.

...

With Google, the nearly 200,000-square-foot Ashton building will be 85% full, Ellis said Tuesday.

A Google Fiber spokesman declined to provide the number of workers that will be based at its second-floor space. But she said the team there would support Google Fiber’s growing presence in the metro area.
User avatar
skinzfan23
City Council
Posts: 11583
Joined: Mon Feb 09, 2004 11:26 am
Location: Omaha/Bellevue

Re: Millwork Commons

Post by skinzfan23 »

Few update photos:
Image

Image

Image

Image
User avatar
Renovator2559
Human Relations
Posts: 944
Joined: Tue May 23, 2023 2:48 pm
Location: Midtown Omaha

Re: Millwork Commons

Post by Renovator2559 »

I took these pictures a few weeks ago.

I didn't know what Millwork Commons area was. I thought Milwork Commons, were the buildings bordering Cuming street. Since Cuming Street is large and discourages crossing over to the other side of the street, this in a way was a discouragement of exploring the area.

This is my first time seeing Millwork commons, and quite impressed of the area. Never really knew what the Millwork Commons was.

The area has the perfect ingredients of becoming another destination neighborhood. I'm impressed with the narrow cobblestone streets that give the Old Market feel.

I just hope this area of Cuming Street goes on a road diet to make this area a seamless cross from the Baseball field.
Though this street being a major artery to Eppley Airfield, who knows if it would be even possible without affecting incoming and outgoing passengers.

Image

Image

Image

Image

Image

Image

Looks like a ghostown, since most of the buildings are under construction but once this area is complete, it looks like this area will become vibrant!

Image
Home sweet, home...Omaha!
F0R_L1F3
Home Owners Association
Posts: 155
Joined: Sun Oct 01, 2023 12:24 am

Re: Millwork Commons

Post by F0R_L1F3 »

Maybe some signage near Cuming would help improve more traffic from the outside. That'd be cool as a small little detail to maybe encourage people to come.
User avatar
Renovator2559
Human Relations
Posts: 944
Joined: Tue May 23, 2023 2:48 pm
Location: Midtown Omaha

Re: Millwork Commons

Post by Renovator2559 »

F0R_L1F3 wrote: Wed May 29, 2024 1:08 pm Maybe some signage near Cuming would help improve more traffic from the outside. That'd be cool as a small little detail to maybe encourage people to come.
Signage would work
Also that street with all the construction going on is a barrier for entry at the moment.

This part of Cuming Street is not pedestrian friendly, the median is basic, thin bland suburban style median that is very difficult to cross. Some of the crossings don't even have painted crosswalks, despite there being a cross, do not cross light.

Image

If a beautiful landscaped median was installed similar to what Creighton at 24th has, with protected pedestrian bollards, this would enhance the connection of Millwork to the Baseball stadium.
Of course Cuming street would be slightly different, as Cuming street is a more high traffic area to the airport, so there would have to be a balance between cars and the pedestrian experience.
Home sweet, home...Omaha!
GenX
Parks & Recreation
Posts: 1216
Joined: Thu Feb 04, 2016 8:16 pm
Location: Omaha

Re: Millwork Commons

Post by GenX »

Renovator2559 wrote: Thu May 30, 2024 3:37 pm
F0R_L1F3 wrote: Wed May 29, 2024 1:08 pm Maybe some signage near Cuming would help improve more traffic from the outside. That'd be cool as a small little detail to maybe encourage people to come.
Signage would work
Also that street with all the construction going on is a barrier for entry at the moment.

This part of Cuming Street is not pedestrian friendly, the median is basic, thin bland suburban style median that is very difficult to cross. Some of the crossings don't even have painted crosswalks, despite there being a cross, do not cross light.

Image

If a beautiful landscaped median was installed similar to what Creighton at 24th has, with protected pedestrian bollards, this would enhance the connection of Millwork to the Baseball stadium.
Of course Cuming street would be slightly different, as Cuming street is a more high traffic area to the airport, so there would have to be a balance between cars and the pedestrian experience.
Cuming will never see a reduction in traffic volume, it’s simply too important of a thoroughfare. The best we would likely get would be something like the pedestrian bridges on Las Vegas Boulevard.
User avatar
Renovator2559
Human Relations
Posts: 944
Joined: Tue May 23, 2023 2:48 pm
Location: Midtown Omaha

Re: Millwork Commons

Post by Renovator2559 »

This is not poorly designed, car centric Las Vegas. There's no need to even mention a city like Las Vegas that is anything but pedestrian friendly. Not a good example.

Pedestrian bridges are too expensive, a poor investment and have been shown to not be successful in the long run. Anyone that goes on wheels are at a disavantage and wouldn't use it.

Here's more detail as to pedestrian bridges are not a wise investment. It even talks about the Las Vegas strip.


Sounds like you misinterpreted, the idea suggested is to rebuild the median in this section to be slightly wider, with landscaping and a holding area for pedestrian with bollards, so that they can cross Cuming street in two parts.
Home sweet, home...Omaha!
F0R_L1F3
Home Owners Association
Posts: 155
Joined: Sun Oct 01, 2023 12:24 am

Re: Millwork Commons

Post by F0R_L1F3 »

Agreed and just touching up the area with more amenities for pedestrians as well such as some benches, maybe some statues or something to talk about the history of the city or state. Nothing super fancy or over the top, just some streetscaping and improvements for the quality of the walk and entrance.
jjjjhskr
Human Relations
Posts: 650
Joined: Sun Mar 13, 2005 11:31 am
Location: O!

Re: Millwork Commons

Post by jjjjhskr »

F0R_L1F3 wrote: Wed May 29, 2024 1:08 pm Maybe some signage near Cuming would help improve more traffic from the outside. That'd be cool as a small little detail to maybe encourage people to come.
The businesses in Millwork Commons do not suffer from a lack of business. Whenever I’ve been there they’re busy and often packed with people. People are discovering this hidden gem.
Back Home in Omaha!
F0R_L1F3
Home Owners Association
Posts: 155
Joined: Sun Oct 01, 2023 12:24 am

Re: Millwork Commons

Post by F0R_L1F3 »

jjjjhskr wrote: Sat Jun 01, 2024 1:40 pm
F0R_L1F3 wrote: Wed May 29, 2024 1:08 pm Maybe some signage near Cuming would help improve more traffic from the outside. That'd be cool as a small little detail to maybe encourage people to come.
The businesses in Millwork Commons do not suffer from a lack of business. Whenever I’ve been there they’re busy and often packed with people. People are discovering this hidden gem.
I defiantly agree and it probably won't have a decrease or one that's impactful with residents going up and the hotels nearby but in an instance like the College World Series, having some character on the outside as a small little entrance wouldn't be that bad, gives it a little charm and maybe a few people here and there will check it out.
halgy
Home Owners Association
Posts: 199
Joined: Tue Apr 26, 2022 12:09 pm
Location: Downtown Omaha

Re: Millwork Commons

Post by halgy »

jjjjhskr wrote: Sat Jun 01, 2024 1:40 pm
F0R_L1F3 wrote: Wed May 29, 2024 1:08 pm Maybe some signage near Cuming would help improve more traffic from the outside. That'd be cool as a small little detail to maybe encourage people to come.
The businesses in Millwork Commons do not suffer from a lack of business. Whenever I’ve been there they’re busy and often packed with people. People are discovering this hidden gem.
I still wish it was a bit easier to get there. I'd imagine most people there either live in the nearby buildings, or drive. I'm in the middle zone where it is a bit too far to walk, but much too near to drive, so I just don't go. Here's to hoping that they'll extend the streetcar just a bit further north, either into Millwork Commons itself, or just south of there before jogging east to the new soccer stadium. That North Downtown area is getting great, and absolutely deserves to be better connected with the other popular downtown/midtown neighborhoods.
User avatar
iamjacobm
City Council
Posts: 10801
Joined: Sat Apr 10, 2010 6:52 am
Location: Chicago

Re: Millwork Commons

Post by iamjacobm »

Pulling 10th street through Cuming to connect with 11th is still in the plans I believe. That will be helpful.
ita
County Board
Posts: 4736
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

halgy wrote: Mon Jun 03, 2024 10:47 am
jjjjhskr wrote: Sat Jun 01, 2024 1:40 pm
F0R_L1F3 wrote: Wed May 29, 2024 1:08 pm Maybe some signage near Cuming would help improve more traffic from the outside. That'd be cool as a small little detail to maybe encourage people to come.
The businesses in Millwork Commons do not suffer from a lack of business. Whenever I’ve been there they’re busy and often packed with people. People are discovering this hidden gem.
I still wish it was a bit easier to get there. I'd imagine most people there either live in the nearby buildings, or drive. I'm in the middle zone where it is a bit too far to walk, but much too near to drive, so I just don't go. Here's to hoping that they'll extend the streetcar just a bit further north, either into Millwork Commons itself, or just south of there before jogging east to the new soccer stadium. That North Downtown area is getting great, and absolutely deserves to be better connected with the other popular downtown/midtown neighborhoods.
I agree that better connections are needed in North Downtown and Millwork Commons. The active mobility plan was just released and there are some prioritized bike infrastructure in the area, mostly the east-west bike lane through Creighton and Builders District but also North to South on 16ths and one leg from Mike Fahey/MECA Drive on 10th, north to Cuming. Anyway, bus, electric bikes and scooters help connect that part of town right now from an alternative transit standpoint, but additional infrastructure improvements are needed to really connect it to downtown, the Riverfront and North Omaha.
Louie
County Board
Posts: 4896
Joined: Fri Dec 23, 2011 4:23 pm
Location: Dundee

Re: Millwork Commons

Post by Louie »

iamjacobm wrote: Mon Jun 03, 2024 11:01 am Pulling 10th street through Cuming to connect with 11th is still in the plans I believe. That will be helpful.
That would absolutely help.
User avatar
Coyote
City Council
Posts: 34366
Joined: Tue Nov 18, 2003 11:18 am
Location: Aksarben Village

Re: Millwork Commons

Post by Coyote »

Louie wrote: Tue Jun 04, 2024 10:30 am
iamjacobm wrote: Mon Jun 03, 2024 11:01 am Pulling 10th street through Cuming to connect with 11th is still in the plans I believe. That will be helpful.
That would absolutely help.
https://www.google.ne/maps/@41.2681883, ... &entry=ttu
Louie
County Board
Posts: 4896
Joined: Fri Dec 23, 2011 4:23 pm
Location: Dundee

Re: Millwork Commons

Post by Louie »

Coyote wrote: Tue Jun 04, 2024 11:16 am
Louie wrote: Tue Jun 04, 2024 10:30 am
iamjacobm wrote: Mon Jun 03, 2024 11:01 am Pulling 10th street through Cuming to connect with 11th is still in the plans I believe. That will be helpful.
That would absolutely help.
https://www.google.ne/maps/@41.2681883, ... &entry=ttu
How recent was this?
User avatar
Brad
Photographer
Posts: 1036469
Joined: Sat Feb 28, 2004 6:03 pm
Location: Omaha, NE

Re: Millwork Commons

Post by Brad »

Louie wrote: Tue Jun 04, 2024 11:23 am
Coyote wrote: Tue Jun 04, 2024 11:16 am
Louie wrote: Tue Jun 04, 2024 10:30 am
iamjacobm wrote: Mon Jun 03, 2024 11:01 am Pulling 10th street through Cuming to connect with 11th is still in the plans I believe. That will be helpful.
That would absolutely help.
https://www.google.ne/maps/@41.2681883, ... &entry=ttu
How recent was this?
Looks like two years ago.

The connection has not started as far as I know, but is scheduled to be completed this year.
User avatar
Coyote
City Council
Posts: 34366
Joined: Tue Nov 18, 2003 11:18 am
Location: Aksarben Village

Re: Millwork Commons

Post by Coyote »

Brad wrote: Tue Jun 04, 2024 12:59 pm
Louie wrote: Tue Jun 04, 2024 11:23 am
Coyote wrote: Tue Jun 04, 2024 11:16 am
Louie wrote: Tue Jun 04, 2024 10:30 am
iamjacobm wrote: Mon Jun 03, 2024 11:01 am Pulling 10th street through Cuming to connect with 11th is still in the plans I believe. That will be helpful.
That would absolutely help.
https://www.google.ne/maps/@41.2681883, ... &entry=ttu
How recent was this?
Looks like two years ago.

The connection has not started as far as I know, but is scheduled to be completed this year.
What is the plans for this year? The UP railyard just north of Cumings? What will this intersection of 10th street and Cumings look like?
User avatar
Brad
Photographer
Posts: 1036469
Joined: Sat Feb 28, 2004 6:03 pm
Location: Omaha, NE

Re: Millwork Commons

Post by Brad »

Coyote wrote: Tue Jun 04, 2024 1:09 pm
What is the plans for this year? The UP railyard just north of Cumings? What will this intersection of 10th street and Cumings look like?
First post on this Page has most of that info:
Dusty wrote: Wed Jan 31, 2024 12:22 pm This is great! I was mainly hoping for the extension to Cuming St. Much more inviting to pull people across the street!

Image
Not sure what they will do with the UP Display track.

Guessing nothing will happen until after the CWS.
User avatar
Coyote
City Council
Posts: 34366
Joined: Tue Nov 18, 2003 11:18 am
Location: Aksarben Village

Re: Millwork Commons

Post by Coyote »

Brad wrote: Wed Jun 05, 2024 8:21 pm First post on this Page has most of that info:
Dusty wrote: Wed Jan 31, 2024 12:22 pm This is great! I was mainly hoping for the extension to Cuming St. Much more inviting to pull people across the street!

Image
Not sure what they will do with the UP Display track.

Guessing nothing will happen until after the CWS.
Thanks! 👍
User avatar
Brad
Photographer
Posts: 1036469
Joined: Sat Feb 28, 2004 6:03 pm
Location: Omaha, NE

Re: Millwork Commons

Post by Brad »

View from the Ballpark
881A9498.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
Garrett
County Board
Posts: 4637
Joined: Wed Nov 26, 2008 6:29 pm
Location: New York City

Re: Millwork Commons

Post by Garrett »

It’s been good to see this neighborhood finally develop. I remember finding it years ago on Google maps and thinking it had a lot of potential, particularly with the existing building stock it had. Good to see it built upon so quickly.
OMA-->CHI-->NYC
User avatar
skinzfan23
City Council
Posts: 11583
Joined: Mon Feb 09, 2004 11:26 am
Location: Omaha/Bellevue

Re: Millwork Commons

Post by skinzfan23 »

Thats a great shot, that you can't see the scope of from the ground.
ita
County Board
Posts: 4736
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

This district is looking really good. I love that they kept much of the existing building stock. I am looking forward to see this continue to grow.
User avatar
iamjacobm
City Council
Posts: 10801
Joined: Sat Apr 10, 2010 6:52 am
Location: Chicago

Re: Millwork Commons

Post by iamjacobm »

TIF request for more apartments and a hotel in Millwork.

"Approval of The FRAME APARTMENTS
AND MILLWORK HOTEL TIF
Redevelopment Project Plan
LOCATION: Northwest and Southeast of 13th and
Nicholas Streets"
halgy
Home Owners Association
Posts: 199
Joined: Tue Apr 26, 2022 12:09 pm
Location: Downtown Omaha

Re: Millwork Commons

Post by halgy »

They said on Grow Omaha last weekend that the city is planning on building parking structure in the neighborhood.
City Plans to Build Parking Garage in Millwork Commons
The City of Omaha plans to build a 600-stall parking garage at Millwork Commons. The city council approved a resolution on consent agenda to allow for the project to be delivered by a construction manager at risk. The parking garage will be located just east of the Ashton building on a parcel bounded by 11th, 12th and Nicholas streets and Millwork Avenue. The estimated cost is $25 to $30 million
Glad to see the neighborhood continuing to build out. I really hope that the streetcar can be extended up there. It would really tie everything together.