Millwork Commons

Downtown, Midtown, and all parts east of 72nd.
User avatar
Coyote
City Council
Posts: 34366
Joined: Tue Nov 18, 2003 11:18 am
Location: Aksarben Village

Re: Millwork Commons

Post by Coyote »

RockHarbor wrote: Sun Dec 23, 2018 7:12 pm Ive been somewhere in North Downtown that was a sort of artists warehouse, or something. I remember pottery and glassblowing, and stuff... I am assuming that is all part of this.
You were at the Hot Shops Art Center.


I try going there every Open House but I missed the last one a few weeks ago. I know several artists, and then they do special events also, like a Frida Kahlo reenactment a few years back.
image.jpeg
You do not have the required permissions to view the files attached to this post.
User avatar
RockHarbor
Planning Board
Posts: 2083
Joined: Wed Mar 23, 2005 7:42 am
Location: Silver State

Re: Millwork Commons

Post by RockHarbor »

Hmmm... "Miss Unibrow", eh? I know Selma Hayek played her in a movie -- a movie I havent yet seen. I dont know anything about her, except that she was a gay woman (I think) and had a unibrow. Anyways... Interesting "rags." I love those rainbowy SWern throws, that cloak the man is wearing reminds me of. Is that you, Coyote? P.S. Hot Shops, eh? I dont remember it called that, but Im sure that is correct.
I can get pushed out because I'm "too much" for some. Then, an observer of me comes suddenly swooping in to "fill my shoes." People are always more accepting of the new one, because their feathers aren't truly ruffled by them. (Yawn) I can count on it every time.
daveoma
Parks & Recreation
Posts: 1213
Joined: Thu Nov 06, 2014 7:18 pm

Re: Millwork Commons

Post by daveoma »

RockHarbor wrote: Sun Dec 23, 2018 10:20 pm Hmmm... "Miss Unibrow", eh? I know Selma Hayek played her in a movie -- a movie I havent yet seen. I dont know anything about her, except that she was a gay woman (I think) and had a unibrow. Anyways... Interesting "rags." I love those rainbowy SWern throws, that cloak the man is wearing reminds me of. Is that you, Coyote? P.S. Hot Shops, eh? I dont remember it called that, but Im sure that is correct.
Frida Kahlo was a Mexican artist of Jewish descent who was very well known during her time. She lived in constant back pain after surviving a bus crash in Mexico, and she used her art to express her incessant pain. In her works, her use of self-portraits is innovative, and the images beg the viewer to understand her agony. She was married to Diego Rivera, arguably the most popular Mexican artist of the 20th century. They were lovers, artists, Socialists, free spirits, and Frida engaged in relationships with women while married to Rivera. I highly recommend you watch the movie "Frida". She is much more than a woman who "had a unibrow".
User avatar
U R my Helix
Human Relations
Posts: 533
Joined: Tue Feb 10, 2015 7:54 pm

Re: Millwork Commons

Post by U R my Helix »

Interesting project potentially adding a lot of housing to downtown. 1201 Nicholas has been identified as a potential 60+ units but I have found nothing yet telling about the total number of projected residential units. Perhaps it is too early but does anyone have a proposed residential unit count for the highlighted proposal? Image
User avatar
iamjacobm
City Council
Posts: 10807
Joined: Sat Apr 10, 2010 6:52 am
Location: Chicago

Re: Millwork Commons

Post by iamjacobm »

Millwork announced that Roger + Chris custom furniture and design firm will be opening a showroom in the district.

https://www.rogerandchris.com/
ScrattyB
Library Board
Posts: 359
Joined: Fri Nov 16, 2018 2:16 pm

Re: Millwork Commons

Post by ScrattyB »

Is this project confirmed? I thought it was still just a proposal?
Louie
County Board
Posts: 4931
Joined: Fri Dec 23, 2011 4:23 pm
Location: Dundee

Re: Millwork Commons

Post by Louie »

ScrattyB wrote: Mon Mar 11, 2019 4:37 pm Is this project confirmed? I thought it was still just a proposal?
This is very much confirmed. I work at Flywheel, and the ball is rolling.
ita
County Board
Posts: 4743
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

iamjacobm wrote: Mon Mar 11, 2019 3:04 pm Millwork announced that Roger + Chris custom furniture and design firm will be opening a showroom in the district.

https://www.rogerandchris.com/
If anyone is wondering, per the Facebook page, the showroom and lab will be at the Mastercraft. It's a pretty high-profile addition to the Mastercraft considering most tenants are highly localized.
User avatar
Coyote
City Council
Posts: 34366
Joined: Tue Nov 18, 2003 11:18 am
Location: Aksarben Village

Re: Millwork Commons

Post by Coyote »

Millwork Commons pushes north downtown redevelopment to next level urbanity
Up next: apartments. In the future: offices, retail, town houses, probably a hotel, a park and an entertainment area with restaurants and a musical performance space.
The developers are seeking a rezoning of the 42-acre area that will make it a Neighborhood Conservation/Enhancement (NCE) district.
User avatar
Coyote
City Council
Posts: 34366
Joined: Tue Nov 18, 2003 11:18 am
Location: Aksarben Village

Re: Millwork Commons

Post by Coyote »

Coyote wrote: Sun Dec 23, 2018 7:24 pm
RockHarbor wrote: Sun Dec 23, 2018 7:12 pm Ive been somewhere in North Downtown that was a sort of artists warehouse, or something. I remember pottery and glassblowing, and stuff... I am assuming that is all part of this.
You were at the Hot Shops Art Center.


I try going there every Open House but I missed the last one a few weeks ago. I know several artists, and then they do special events also, like a Frida Kahlo reenactment a few years back.

image.jpeg
[youtube]
[/youtube]
daveoma
Parks & Recreation
Posts: 1213
Joined: Thu Nov 06, 2014 7:18 pm

Re: Millwork Commons

Post by daveoma »

That video was great :D Thank you for posting!
User avatar
iamjacobm
City Council
Posts: 10807
Joined: Sat Apr 10, 2010 6:52 am
Location: Chicago

Re: Millwork Commons

Post by iamjacobm »


The iconic orange arch sculpture that has greeted visitors to Gene Leahy Mall for decades was moved yesterday to Millwork Commons!
When Michael Alley of @apmarchitecture Millwork’s architectural partner, learned the sculpture – also known as the “space frame” – wasn’t part of the Mall’s redesign, he approached the Millwork ownership team about saving it. All agreed there was an opportunity to repurpose a piece of Omaha history and to use the space frame as it was first intended: to mark a new beginning.
The Mall was part of the “Back to the River” movement inspired by Mayor Gene Leahy in the early 1970’s, and the space frame was intended as a gateway. It was designed by Lawrence Halprin, a notable landscape architect, whose firm designed the Mall.

Moving it was no small task, but made easier and cost-efficient thanks to partners @fielddaydev who coordinated with crews working on the Mall. The space frame is 85 feet long and was transported down 13th Street on a flatbed truck!
There are already lots of ideas for how to incorporate the space frame. However, there’s more planning and construction to do before it reaches its permanent home within the neighborhood. Stay tuned! 📷 at Millwork Commons by Terry Koopman
📷 at the Mall by Field Day Development
User avatar
Coyote
City Council
Posts: 34366
Joined: Tue Nov 18, 2003 11:18 am
Location: Aksarben Village

Re: Millwork Commons

Post by Coyote »

:thumb: good find!
BIGO88
Library Board
Posts: 464
Joined: Sun Nov 04, 2018 7:16 pm

Re: Millwork Commons

Post by BIGO88 »

The building behind the hotels on Izard St has been getting lots of work done the last few weeks. Have they said what its going to be yet?
ita
County Board
Posts: 4743
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

I have been following Lund Ross's Facebook page because they are working on the Ashton and there are some in-progress videos posted from yesterday.

https://www.youtube.com/watch?v=NoCbc81 ... ru&index=9

The link is to a drone video on the exterior, but there is a series of videos posted by the same guy of the work going on inside.
User avatar
iamjacobm
City Council
Posts: 10807
Joined: Sat Apr 10, 2010 6:52 am
Location: Chicago

Re: Millwork Commons

Post by iamjacobm »

TIF request for apartments at 1200 N 12th St on the planning board agenda next week. Will update with details when the actual TIF document gets posted.
ita
County Board
Posts: 4743
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

iamjacobm wrote: Mon Apr 27, 2020 5:33 pm TIF request for apartments at 1200 N 12th St on the planning board agenda next week. Will update with details when the actual TIF document gets posted.
Looks like it should be the building marked as a mixed use building on marked purple/blue (sorry, I am a little colorblind) east of the Mastercraft on the map on this page of their website.

Millwork Commons Project Map

There are a couple other sites 'Developing'. I really like this project and hope they make it through this bump in the economic road, especially with the anchor being small businesses.
User avatar
Taco
Human Relations
Posts: 514
Joined: Mon Jul 27, 2015 10:34 am

Re: Millwork Commons

Post by Taco »

ita wrote: Tue Apr 28, 2020 9:24 am
iamjacobm wrote: Mon Apr 27, 2020 5:33 pm TIF request for apartments at 1200 N 12th St on the planning board agenda next week. Will update with details when the actual TIF document gets posted.
Looks like it should be the building marked as a mixed use building on marked purple/blue (sorry, I am a little colorblind) east of the Mastercraft on the map on this page of their website.

Millwork Commons Project Map

There are a couple other sites 'Developing'. I really like this project and hope they make it through this bump in the economic road, especially with the anchor being small businesses.
From your link it looks like the project is the "Disbrow block" https://millworkcommons.com/introducing ... row-block/
ita
County Board
Posts: 4743
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

Taco wrote: Tue Apr 28, 2020 11:38 am
ita wrote: Tue Apr 28, 2020 9:24 am
iamjacobm wrote: Mon Apr 27, 2020 5:33 pm TIF request for apartments at 1200 N 12th St on the planning board agenda next week. Will update with details when the actual TIF document gets posted.
Looks like it should be the building marked as a mixed use building on marked purple/blue (sorry, I am a little colorblind) east of the Mastercraft on the map on this page of their website.

Millwork Commons Project Map

There are a couple other sites 'Developing'. I really like this project and hope they make it through this bump in the economic road, especially with the anchor being small businesses.
From your link it looks like the project is the "Disbrow block" https://millworkcommons.com/introducing ... row-block/
I can't believe I missed that update. However, based on the release, the Disbrow Block seems to be reserved for office with ground floor retail. The Douglas County GIS lists the northern, larger warehouse as 1201 N 12 St. and the other building has an Izard address. If you look at buildings off 11th Street, I still think 1200 N 12th St. puts next week's proposal in the mixed used building next to Mastercraft.

On the Disbrow Block announcement, I like the rendering and am exciting that they are planning to have add a substantial amount of office space in Millwork Commons. In a Grow Omaha show a couple weeks ago, Jorge Sotolongo reported there being very strong interest from startups and local tech firms for space in Millwork. This validates that anecdotal evidence that there is real momentum for this development.
ita
County Board
Posts: 4743
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

Image
Omahacritic
Human Relations
Posts: 814
Joined: Thu Jul 18, 2019 11:10 pm

Re: Millwork Commons

Post by Omahacritic »

These buildings are really large. Will take a long time to build out. The one current under work is The Radford. The “future build” will be years away unless Omaha gets really lucky.

I wonder what the EIS says about traffic. These are all 2 lane streets and really no way to expand them. No off street parking. Any new construction likely has to be garage space.
ita
County Board
Posts: 4743
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

Omahacritic wrote: Tue Apr 28, 2020 10:31 pm These buildings are really large. Will take a long time to build out. The one current under work is The Radford. The “future build” will be years away unless Omaha gets really lucky.

I wonder what the EIS says about traffic. These are all 2 lane streets and really no way to expand them. No off street parking. Any new construction likely has to be garage space.
Yeah, for sure. This area will take a while to build out. If my math is right and if you include the proposed building, this block alone will have something close to 200,000 sq. ft. of office space. For reference, Linkedin's building is approximately 200,000 sq. ft. If they land a couple big tenants, they could fill up fast, but that's a big IF. I wonder how they will utilize the Mule Barn, additional office space, art gallery, indoor market?

According to the development map on their website, there is supposed to be a fairly large looking garage structure on the corner of Millwork Ave and 14th that is 'Developing'. They will need to resolve this issue as there is currently no bus service to the area, if I am reading Metro's maps correctly, and limited housing options nearby.
Louie
County Board
Posts: 4931
Joined: Fri Dec 23, 2011 4:23 pm
Location: Dundee

Re: Millwork Commons

Post by Louie »

ita wrote: Wed Apr 29, 2020 8:59 am
Omahacritic wrote: Tue Apr 28, 2020 10:31 pm These buildings are really large. Will take a long time to build out. The one current under work is The Radford. The “future build” will be years away unless Omaha gets really lucky.

I wonder what the EIS says about traffic. These are all 2 lane streets and really no way to expand them. No off street parking. Any new construction likely has to be garage space.
Yeah, for sure. This area will take a while to build out. If my math is right and if you include the proposed building, this block alone will have something close to 200,000 sq. ft. of office space. For reference, Linkedin's building is approximately 200,000 sq. ft. If they land a couple big tenants, they could fill up fast, but that's a big IF. I wonder how they will utilize the Mule Barn, additional office space, art gallery, indoor market?

According to the development map on their website, there is supposed to be a fairly large looking garage structure on the corner of Millwork Ave and 14th that is 'Developing'. They will need to resolve this issue as there is currently no bus service to the area, if I am reading Metro's maps correctly, and limited housing options nearby.
We've been told to expect surface parking until the demand reaches the level it needs to build out the parking garage.
Omahacritic
Human Relations
Posts: 814
Joined: Thu Jul 18, 2019 11:10 pm

Re: Millwork Commons

Post by Omahacritic »

The only parking would be north of Millwork which is 2 full blocks from this building. 14th Street is even further and it looks to UP land. A little bit of space East of mule barn is maybe 20 spaces possible. But maybe they can park on lower level .

But the “future build” site can be a pretty big lot.
User avatar
iamjacobm
City Council
Posts: 10807
Joined: Sat Apr 10, 2010 6:52 am
Location: Chicago

Re: Millwork Commons

Post by iamjacobm »

The TIF proposal is new construction on the vacant land directly east of The Mastercraft building. 171 units with 11k SF of ground floor retail. Bluestone is the developer, they have a number of infill apartment projects around Omaha. Roughly $30.5 million project, requesting about $3.5 million in TIF.

Renderings at the end of the document.
https://planning.cityofomaha.org/images ... May/04.pdf
User avatar
Taco
Human Relations
Posts: 514
Joined: Mon Jul 27, 2015 10:34 am

Re: Millwork Commons

Post by Taco »

I like this design with the slight angulations better than the blockiness of Bluestone's last project (Bos), but have a hard time seeing it as more than a cheaply designed warehouse for people. Really wish Bluestone would use higher quality materials and put more effort than just placing a big box.

All that said, I am glad this area is being developed and Bluestone does a good job getting the dirt moving.
Louie
County Board
Posts: 4931
Joined: Fri Dec 23, 2011 4:23 pm
Location: Dundee

Re: Millwork Commons

Post by Louie »

Fantastic!
User avatar
skinzfan23
City Council
Posts: 11619
Joined: Mon Feb 09, 2004 11:26 am
Location: Omaha/Bellevue

Re: Millwork Commons

Post by skinzfan23 »

Not in love with the design...but I am excited to see further development in the area.
ita
County Board
Posts: 4743
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

skinzfan23 wrote: Fri May 01, 2020 9:10 am Not in love with the design...but I am excited to see further development in the area.
I am in the same boat, not fond of the design (except the courtyard, I love that!), but glad there is already residential housing in play. Construction can happen as spring of this year (that would mean it starts this month which sounds optimistic). Parking situation is interesting; will be surface parking in a lot north, which is slated for development in the future, with a reference of a future parking structure that will be in the Commons at some future date. I like that they will have a central parking structure for the district rather than each building having its own. One interesting this that stood out to me is the submission states that the area is well served by public transit. Is that correct? Based on my reading of the Metro maps, there are no buses that go to this area for at least a few blocks.
User avatar
Coyote
City Council
Posts: 34366
Joined: Tue Nov 18, 2003 11:18 am
Location: Aksarben Village

Re: Millwork Commons

Post by Coyote »

Jins123
Library Board
Posts: 267
Joined: Mon Sep 18, 2017 8:02 pm

Re: Millwork Commons

Post by Jins123 »

“ $30.5 million residential building is to contain 171 units. Rent ranges from $900 to about $1,500”

Am I out of touch in laughing in how comically sad these prices are for 13th & Nicklous area, I get what they’re trying to do, but JFC, really hope North Omaha residents fight to keep this kind of takeover south
Omahacritic
Human Relations
Posts: 814
Joined: Thu Jul 18, 2019 11:10 pm

Re: Millwork Commons

Post by Omahacritic »

But each apartment will reflect diversity and inclusiveness.
Omahacritic
Human Relations
Posts: 814
Joined: Thu Jul 18, 2019 11:10 pm

Re: Millwork Commons

Post by Omahacritic »

Pictures from Millwork. Fresh paint on water tank. New streets installed. Good looking facade on the north face. Still not 100% finished.

Give the building an orchid. Looks like good set-up for re-use.


Image

Image

Image

Image

Image

Image

Image

Image

Image
ita
County Board
Posts: 4743
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

Omahacritic wrote: Fri Jul 03, 2020 2:17 pm Pictures from Millwork. Fresh paint on water tank. New streets installed. Good looking facade on the north face. Still not 100% finished.
Thanks for the pictures. It's been a while since I last drive by, but it's looking good. I like what they did with the water tank. This is probably my favorite 'district' under development right now, so I appreciate the update!
Omahacritic
Human Relations
Posts: 814
Joined: Thu Jul 18, 2019 11:10 pm

Re: Millwork Commons

Post by Omahacritic »

: It’s an exciting project. Something about the place. Could be a vortex for creative energy. Software companies will be smart to locate in the area. :roll:
ita
County Board
Posts: 4743
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

Omahacritic wrote: Sun Jul 05, 2020 11:00 pm : It’s an exciting project. Something about the place. Could be a vortex for creative energy. Software companies will be smart to locate in the area. :roll:
I am glad you agree.
User avatar
Greg S
City Council
Posts: 8962
Joined: Thu Aug 26, 2004 10:46 am

Re: Millwork Commons

Post by Greg S »

This is good to see.

Greg
User avatar
Taco
Human Relations
Posts: 514
Joined: Mon Jul 27, 2015 10:34 am

Re: Millwork Commons

Post by Taco »

New street looks high quality. Glad to see wide sidewalks.
User avatar
Omaha Cowboy
The Don
Posts: 1013711
Joined: Wed Jan 07, 2004 5:31 am
Location: West Omaha

Re: Millwork Commons

Post by Omaha Cowboy »

Looks like we’re all in agreement then...

Ciao..LiO...Peace
Go Cowboys!
ita
County Board
Posts: 4743
Joined: Thu Jul 12, 2018 4:11 pm

Re: Millwork Commons

Post by ita »

I saw on Facebook that Hutch is leaving Midtown Crossing for Millwork Commons at the Ashton Building. I think it is more fitting, but it is another blow to Midtown Crossing for sure. In the spirit of keeping it positive, I put it in this thread to avoid sullying the MC thread with a post about another business leaving.